How To Resolve Brother Printer Error Code 48

Brother Printer Error Code 48

The Brother printers are known around the globe for their best printing quality and ease of printing. These printers can be used easily by both personal and official purposes.

The Brother printers are available for the needs of every user. But there are some issues that can be faced by the users in the form of the errors. Some of the most common errors include the Brother printer error code 48.

Before you are introduced to the steps of how to fix this error, you must know the causes behind it. When you are analyzing the issue it is going to be much easier for you to understand the issue.

Well among many, the main cause is when the print head cable is not stable. But you do not have to worry as they can be easily resolved. You just need to follow some steps.

There are going to be some users who might not know how to resolve the issue. What they can do is seek help from the printer experts. Our experts are experienced and have been well known to resolve these errors.

They are going to guide you throughout so that you make sure that you do not face such an issue again and If you do, you are able to resolve it yourself. They are going to provide you with the most reasonable solutions.

If you are a tech-savvy and are looking to resolve the issue on your own, then follow the steps that are mentioned below in order to resolve the Brother printer error code 48.

Steps to Resolve Brother Printer Error Code 48

Cartridge setting:

The first solution could be by replacing the cartridges of the printer. What you need to do is to use new ink. This is among the troubleshooting steps after you might not have to try anything else.

Sometimes, this solution is going to resolve the error in the first go. But if you see that the error still exists, then you must jump to the next solution.

Clean the printer:

Well, the most used method in all is to reset the print-head that will be able to resolve all the Brother printer issues including the Brother printer code 48. Make sure that you are firstly excluding the print head to clean it properly.

When you are doing that make sure that you are using a clean cloth or a piece of cotton. Make sure that you leave the parts for at least five minutes so that they can dry properly. After that, you need to install the software of the print-head as well as the cartridges. Most of the time, this solution is going to resolve this error.

Restart:

If you are still unable to resolve the issue, then follow this solution where you need to turn off the printer and then plug about all the cables. Leave the printer like that for a minute. This step is going to help you identify the issue.

After a minute, make sure that you replug all the wires back and then start the printer to check whether it has started to work or not. Makes sure that is still not giving the Brother printer error code 48.

If you are still facing this issue, then you need to get in touch with the experts at printer error code. They are your only hope in understanding the issue and making it go away. They will guide you with the best tricks to resolve the error.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *