Canon Printer Error Code 1403: Best Method to Fix Issue

Are you struggling with Canon printer error code 1403, then here we have some easy and effective solutions to fix this. Canon printers are known for printing feasibly compared to other brands and promote printing, scanning, and copying high-quality images, documents, and spreadsheets. It provides a smooth printing experience to the users and comes with multiple functions and ease of handling. Facing errors while using the Canon printer is very common, at times printer fails to perform its functions which leads to many errors.

But to not get upset, these errors are curable. Canon printer error code 1403 is also fixable and you can fix them just by following some simple steps. There are many reasons for Canon printer error code 1403, like if the cartridge is damaged, the print head is unable to move properly, and improper installation of the print heat. It is necessary to know the causing root of the problem before solving it. Once you get to know the cause of the problem it becomes easy to find a simple and effective solution.

Table of Contents

Techniques to fix Canon printer error code 1403:

Sometimes printers may face unanticipated printing errors. This error usually happens due to a damaged print head or if the print head is missing. And if the printer is too old then this error might occur due to a defective printhead. Follow the below-given methods to resolve How to fix Canon printer error code 1403:

1. Update Canon printer driver:

If the printer driver gets outdated, then there is a possibility of facing this error on the printer. It is vital to fix it, follow the below steps to update the printer drivers.

On the window, visit the start icon in the lower left corner.
Click on the control panel and click on the hardware and sound option.
Then tap on the device manager and then on the printer.
From the drop-down menu, tap on the update driver option. After this, you need to select whether you want to search for the driver automatically or manually
You can also go to the official website of the Canon printer and install the drivers from there.

2. Replace the ink cartridge:

This error on the printer is associated with the ink cartridge. So, it can fix it by replacing it with a new ink cartridge. Simply go through the below steps to do so:

Take out the front cover and paper output tray from the printer, and open the paper output cover again.
Adjust the cartridge appropriately by pushing it and then remove it instantly one by one from the printer.
Unpack the new cartridge and remove the protective tape from the surface of the cartridge.
And then insert the cartridge and move it slightly within the cartridge holder. Push until you hear the click sound.
Once you hear that means the cartridge is installed properly in its slot.
After completing the process, close the paper output cover back and start printing.

3. Reset the printer:

Resetting the printer is as easy as a piece of cake. To do this, firstly you have to put your printer in sleep mode and else follow the below-given methods to reset the printer.

Initially, turn the printer on and then go to the menu.
In the setup menu, visit the device settings.
And then click on the ok option.
After this, tap on the reset
Lastly, tap on ok, to start the resetting process.

4. Clean printer head:

If there is dust present on the top of the printer or inside the printer, then it will prevent the printer from doing work properly. Go through the below steps to clean the printer head in the Canon printer.

Click on the start button, located in the bottom left corner.
Then enter the device and printer on the control panel.
After this, click on it and then visits the printer properties.
Tap on the hardware option and navigate to the cleaning option.
Click on it to clean the print head.

5. Unclog printhead nozzle:

If there is any blockage in the nozzle of the printhead, then it fails to deliver the ink properly. Go through the below steps to clean the nozzle.

Turn the printer off and also disconnect the power supply.
Instantly take out the ink cartridge from the printer.
And take a paper towel and dampen it in cleaning solvent.
And then place the paper towel onto the printhead.
Then rub the printer head nozzle with a new paper towel.
Once you have done this, install the cartridges back.
Power on the printer and see whether it is fixed or not.

6. Change the printer driver default:

If there are any inappropriate settings done on the printer that can lead to this error how to fix Canon printer error code 1403? To fix this set the printer driver default, and follow the below steps.

Click on the start icon, on your computer.
Tap on settings and then on the printer and faxes option.
After this, click on the printer and select properties.
And then on the advanced tab, choose the button printing default.
Lastly, change the setting accordingly.

Make sure that you have closed the printer properly, it is not open from any side. And also attach the printer nicely. And also remove the dust from the printer so that it can perform its function properly. Follow the above steps to know How To Fix Canon Printer Error Code 1403? carefully before seeking help from anyone and hiring a technician.

Sum up:

Certainly, these steps will help you in resolving the Canon printer error code 1403. Canon printer is the best printer as compared to other brands. Follow the above steps carefully and step by step for How to fix Canon printer error code 1403. These solutions are appropriate and users can use them in any Canon printer model. If still unable to fix canon printer error e02, then try to get in touch with experts. They will help you to get rid of this error or you might need to take your computer to the workshop for repair.

Canon Printer Error Code 1403: Best Method to Fix Issue