Fixing Canon Printer Error 5b00; The Way Professionals Do

Canon Printer Error 5b00

Users usually face Canon Printer Error Code 5b00. The error occurs when the ink system fails to absorb the ink. The ink system in Canon printer continuously fills the ink inside the printer.

At times when it fails to absorb you get to canon error 5b00 messages. This canon error can be seen in model no.s Canon mp280, Canon mx410, Canon g2000, Canon mp287.

The happy news is the same troubleshooting tricks can resolve the error 5b00 in all these canon printers.

Fixing Canon Error code 5b00

Two methods can fix this error for you. The first method is widely used and mostly fixes the error. In case it doesn’t turn out good for you; you can always opt to follow the second method as well. Let us check these both in detail

Method 1: Resetting Waste Ink System Count

Resetting the waste ink absorber on a Canon mp280, Canon mx410, Canon g2000, Canon mp287 can resolve error code 5b00. Follow the below-given steps in a specified order to fix the error code 5b00.

Step 1:

  • Turn Off your Printer entirely while removing the power cable.

Step 2:

  • Long press and keep pressing the “Resume” button on your Canon printer.

Step 3:

  • Simultaneously press and hold the “Power” button of your printer. The Green LED will lit up. At the same time as it is held down, hold down the “Power” button. Then the green led light should come on.

Step 4:

  • Release the “Resume” Button, when the green light shows up, now release the “Resume” button.

Step5:

  • Keep holding the power button and again press the “Resume” button twice. The LED light should go first amber and then green again.

Step 6:

  • Release the “Power” button now.

Step 7:

Now read carefully and press as mentioned:

  • “Resume” button four times
  • “Power” button once this will confirm your action of “Resetting Ink counter absorber.)

Step 8:

  • Now, turn on your printer.

Doing these steps will reset the waste ink counter system, and your printer can get back to work. The canon printer error 5b00 will go away from your screen.

In case this method doesn’t resolve the issue for you, there is another trick worth trying. Read the next section to learn what it is.

Method 2: Clean The Waste Ink Foam Manually

Yes, you can manually clean the ink foam. Doing this will also let your printer work again while removing the canon 5b00 error from many canon printer models. Following check out, how to do this:

Step1:

  • Keep your printer turn on and open the front cover of it.

Step 2:

  • Look behind the cartridges; there will be a row of white rollers.

Step 3:

  • Take out all the cartridges one by one to reach the rollers. Further, if you look closely, there is a foam pad near the rollers.

Step 4:

  • Clean the foam pad with the help of a paper towel. Keep dabbing until you collect all ink waste on paper towel pieces.

Step5:

  • Replace the cartridges back in their place. Make sure you seat them well. Close the printer cover.

Step6:

  • Now, restart your printer by powering it Off and On again.

This method is not known to many. Usually, people suggest to work out with the waste counter reset method.
This also resolves the canon error 5b00 successfully, so why not give it a try?

Conclusion:

Unfortunately, if none of this method worked for you and Canon printer error, 5b00 still refuses to go, even then you have hope. In such a scenario contact the canon printer support helpdesk.

The expert technicians can provide you step by step instructions on how to fix this error. Visit our website Printer Error Code to know more!

Similar Posts

8 Comments

  1. First off I would like to say terrific blog!
    I had a quick question in which I’d like to ask if you do not mind.
    I was interested to find out how you center yourself and clear your head before
    writing. I have had difficulty clearing my thoughts in getting my thoughts out.

    I truly do enjoy writing however it just seems like the first 10
    to 15 minutes are lost simply just trying to figure out
    how to begin. Any ideas or tips? Many thanks!

  2. Pretty nice post. I just stumbled upon your weblog and wanted to say that I’ve really enjoyed browsing your blog
    posts. In any case I’ll be subscribing to your rss feed and I hope you write again soon!

  3. You made some good points there. I looked on the internet for the subject matter and found most individuals will approve with your site.

  4. Aw, this was an exceptionally good post. Taking
    the time and actual effort to make a good article… but what can I
    say… I hesitate a lot and never manage to get nearly anything done.

  5. Great post. I was checking constantly this blog and I’m impressed!
    Extremely useful info specifically the last part 🙂 I care for such information a lot.
    I was seeking this particular information for a long time.

    Thank you and best of luck.

  6. I think this is one of the most vital information for me.
    And i’m glad reading your article. But want to remark on few general things, The
    website style is ideal, the articles is really excellent
    : D. Good job, cheers

  7. I have a Canon TS704 printer with an absorber full error message 5B00. its giving error 002 on the service tool when trying to reset

Leave a Reply

Your email address will not be published. Required fields are marked *